Mosquito Magnet^® Commercial Pro

Why would you need to take The power pack off the stand.

• Storage
• Moisture inside and you need to shake and turn it upside down
• You need to replace the Power Pack

If you need to remove the Power Pack follow these steps:

1. Start off by shutting off the Propane Tank.
   
   
   
   NOTE: Wait for the trap to cool down before continuing. Failure to do this can result in damage to the trap.
   
2. Disconnect the gas line from both ends
   
   
   Open the clear door on the side of the Green Housing.
3. Take out the Net.
4. Remove the two wing nuts(A) and one screw(B).
   
   
   
   
5. Slide the Metal Plate(C) up. That will release the Upper Bolts(D) and then you can take off the Green Housing.
6. Remove the two screws under the Power Pack that connect to the Pedestal Adapter.
   
   
   
   NOTE: You must hold onto the Power Pack while you remove these two screws, failure to do this will result in the Power Pack falling to the ground.