Basic Attractant usage Information

• Directions For Use:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

• Replace attractant every 21 days:

Based on release rate studies conducted at a constant ambient air temperature of 80° for 21 days. Octenol release from this product will be more rapid at higher ambient air temperature.

• Storage & Disposal:
  
  Do not contaminate water, food or feed by storage and disposal.
  • Storage:Store unopened attractant cartridge in a cool, dry place. Discard outer plastic bag in trash.
  • Disposal:Do not reuse attractant cartridge. Dispose of used attractant cartridge in the trash.

Choose your style of Attractant carrier

... Choose by Type ...Tube StyleDrop in styleDrop in tube style

... Choose by Trap ...Commercial ProFreedomLibertyDefenderPro/Pro PlusLiberty Plus

Downloadable Instructions

---

Tube Style

Traps used on:

• Commercial Pro
• Freedom
• Liberty
• Defender

Step 1 Using a coin, unscrew cover from carrier compartment. This is located inside the black plume tube.	Step 2 Peel off protective cover from Mosquito Magnet ® Octenol Biting Insect Attractant
Step 3 Slide Mosquito Magnet® Insect Attractant into the cattier compartment.	Step 4 Reverse step one to close carrier compartment.

---

Drop In Style Traps used on:

• Pro
• Pro Plus

Step 1 Locate the round green attractant compartment cap located under the hood and turn to the unlock position. Lift off cap to open.	Step 2 Peel off protective cover from Mosquito Magnet ® Octenol Biting Insect Attractant.
Step 3 Placed open cartridge inside the compartment's center delivery tube.	Step 4 Replace the attractant compartment cap and turn to the locked position

---

Drop In Tube Style Traps used on:

• Liberty Plus

Step 1 Locate the black plume tube and separate it from the power head.	Step 2 Peel off protective cover from Mosquito Magnet ® Octenol Biting Insect Attractant
Step 3 Remove the attractant carrier located inside the plume chamber.	Step 4 Slide the opened cartridge face down into the carrier's retaining rails. The cartridge will lock into place with a click.
Step 5 Place the carrier into the plume tube with the fins down.	Step 6 Re-insert the plume tube into the power head's trumpet