Basic Attractant usage Information

• Directions For Use:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

• Replace attractant every 21 days:

Based on release rate studies conducted at a constant ambient air temperature of 80° for 21 days. The Lurex3™ release from this product will be more rapid at higher ambient air temperature.

• Storage & Disposal:
  
  Do not contaminate water, food or feed by storage and disposal.
  • Storage:Store unopened attractant cartridge in a cool, dry place. Discard outer plastic bag in trash.
  • Disposal:Do not reuse attractant cartridge. Dispose of used attractant cartridge in the trash.

Choose your style of Attractant carrier

... Choose your trap ...With a capped attractant tubeWithout a capped attractant tube

Downloadable Instructions

---

With a capped attractant tube

Step 1 Using a coin, remove the cap from the attractant tube. Save for future use, as cap is needed for other attractants.	Step 2 Peel off tamper evident seal from Lurex3™ attractant cartridge. The appearance of condensation on the inside of the cartridge is normal. Do not remove end cap.
Step 3 Insert Lurex3™ attractant cartridge into attractant tube. Turn clockwise until it snaps into place.	Step 4 Remove and replace Lurex3™ attractant cartridge every 21 days, using a counter clockwise rotation.

---

Without a capped attractant tube

Step 1 Snap the attractant adapter onto the Lurex3™ attractant cartridge.	Step 2 Peel off tamper evident seal from Lurex3™ attractant cartridge. The appearance of condensation on the inside of the cartridge is normal. Do not remove end cap.
Step 3 Insert Lurex3™ attractant cartridge into attractant tube. Turn clockwise until it snaps into place.	Step 4 Remove and replace Lurex3™ attractant cartridge every 21 days, using a counter clockwise rotation.

* Patent Pending