Mosquito Magnet^® Freedom

Why would you need to take The power pack off the stand.

• Storage
• Moisture inside and you need to shake
• You need to replace the Power Pack

If you need to remove the Power Pack follow these steps:

1. Start off by shutting off the Propane Tank.
   
   
   
   NOTE: Wait for the trap to cool down before continuing. Failure to do this can result in damage to the trap.
2. Disconnect the gas line from both ends.
   
   
   
3. Open the Green Housing.
4. Remove the two screws(A) holding the power pack to the housing.
   
   
   
   
   
5. Remove Power Pack from the housing.