Mosquito Magnet® Pro/Pro Plus

High Temp

This fault code could be caused by one of the following problems.

  • LCD Display - High TempTrap Overheats - When the trap reaches a certain temperature, it will automatically shut down. If this happens, shut down the trap for 1 to 2 hours and start again.
  • Slow or Dead Fan - If the fan is running slow or not at all then this will cause the trap to overheat.
  • Placement - If the trap is placed in direct sunlight in high temperature climate, then the trap may run hotter. It is recommended to run the trap in the shade.
  • Type of gas - The recommended gas to use is Propane, in some areas of the country the only available gas is Butane. The trap can run ok using butane but it will run hotter. As mentioned in the previous step of you are using butane then you should defiantly place the trap in the shade.
  • Other Problem – If, after trying to resolve your issue with the above steps you still continue to get the same fault, there may be an internal issue with your unit. If you continue to get this fault, please contact our technical support call center for additional assistance.
If you still need additional assistance
Please contact technical support
<< Back to previous page
Technical Support Home Page
Mosquitomagnet.com Home page